This Article Full Text (PDF) All Versions of this Article: 0885328207078075v1 22/6/485    most recent References Alert me when this article is cited Alert me if a correction is posted Services Email this article to a friend Similar articles in this journal Similar articles in Web of Science Similar articles in PubMed Alert me to new issues of the journal Add to Saved Citations Download to citation manager Request Permissions Request Reprints Add to My Marked Citations Citing Articles Citing Articles via Google Scholar Citing Articles via Scopus Google Scholar Articles by Kim, H.-W. Articles by Rhyu, I.-C. Search for Related Content PubMed PubMed Citation Articles by Kim, H.-W. Articles by Rhyu, I.-C. Social Bookmarking                         What's this?

Bone Formation on the Apatite-coated Zirconia Porous Scaffolds within a Rabbit Calvarial Defect

Department of Biomaterials Science, School of Dentistry Dankook University, Korea, kimhw{at}dku.edu

Seung-Yun Shin

Department of Periodontology and Dental Research Institute School of Dentistry, Seoul National University, Korea, Department of Periodontics, Samsung Medical Center, Korea

Hyoun-Ee Kim

School of Materials Science and Engineering Seoul National University, Korea

Yong-Moo Lee

Department of Periodontology and Dental Research Institute School of Dentistry, Seoul National University, Korea

Chong-Pyoung Chung

Department of Periodontology and Dental Research Institute School of Dentistry, Seoul National University, Korea

Hae-Hyoung Lee

Department of Biomaterials Science, School of Dentistry Dankook University, Korea

In-Chul Rhyu

Department of Periodontology and Dental Research Institute School of Dentistry, Seoul National University, Korea, icrhyu{at}snu.ac.kr

Previously, a strong and bioactive ceramic scaffold consisting of a porous zirconia body coated with apatite double layers (fluorapatite (FA) as an inner layer and hydroxyapatite (HA) as an outer layer) was successfully fabricated. In this contribution, the authors investigate the in vivo performance of the engineered bioceramic scaffolds using a rabbit calvarial defect model. In particular, the porosity and pore size of the scaffolds are varied in order to observe the geometrical effects of the scaffolds on their bone formation behaviors. The scaffolds supported on a zirconia framework can be produced with an extremely high porosity (~84—87%), while retaining excellent compressive strength (~7—8 MPa), which has been unachievable in the case of pure apatite scaffolds (~74% porosity with ~2MPa strength).

The experimental groups used in this study include three types of zirconia scaffolds coated with apatite; high porosity (~87%) with large pore size (~500— 700 µm): AZ-HL, high porosity (~84%) with small pore size (~150—200 µm): AZ-HS, and low porosity (~75%) with large pore size (~500—700 µm): AZ-LL, as well as one type of HA porous scaffold: low porosity (~74%) with a large pore size (~500—700 µm) for the purpose of comparison. The scaffolds prepared with dimensions of ~ 10 mm (diameter) x 1.2 mm (thickness) are grafted in rabbit calvaria defects. The histological sections are made at 4 and 12 weeks after surgery and immunohistochemical analyses are performed on the samples.

All of the specimens show a good healing response without adverse tissue reactions. Good healing is shown at 4 weeks post-surgery with the ingrowth of new bone into the macropore-channels of the scaffolds. The newly formed bone amounts to ~19.9—24.2% of the initial defect area, depending on the scaffold type, but there is no statistical significance between the scaffold groups. However, the defects without the scaffolds (control group) show a significantly lower bone formation ratio (~4.3%). At twelve weeks after surgery, the extent of new bone formation is more pronounced in all of the scaffold groups. All of the scaffold groups show significantly higher bone formation ratios (26.7—46.9%) with respect to the control without the graft. In the comparison between the scaffold groups, those with high porosities (AZ-HL and AZ-HS) exhibit significantly higher bone formation as compared to the scaffold with low porosity (AZ-LL).

Based on the present in vivo test performed within a rabbit calvaria defect model, it is concluded that the apatite-coated zirconia scaffolds show good bone forming ability and are considered to be a promising scaffolding material for bone regeneration since they possess a high level of both mechanical and biological properties.

Key Words: bioceramic scaffold • rabbit calvarial defect • bone formation • apatite coating • zirconia.

This version was published on May 1, 2008

Journal of Biomaterials Applications, Vol. 22, No. 6, 485-504 (2008)
DOI: 10.1177/0885328207078075


CiteULike    Complore    Connotea    Del.icio.us    Digg    Reddit    Technorati    Twitter    What's this?